Key Specifications
Colourways: Black; White
Fan Size: 140mm
Configuration: Single fan
Blade Orientation: Standard; Reverse
Lighting: ARGB illumination across the translucent fan blades and central hub ring
Fan Speed: Standard: 400–2500 RPM; Reverse: 400–2650 RPM; 0 RPM below 5% PWM
Airflow: Standard: Up to 110 CFM; Reverse: Up to 98 CFM
Static Pressure: Standard: Up to 5.2 mm H₂O; Reverse: Up to 5.1 mm H₂O
Noise Level: Not stated by manufacturer
Bearing Type: Fluid dynamic bearing
Connection & Control: 4-pin PWM plug with integrated PST pass-through socket; 3-pin 5V ARGB plug with integrated ARGB pass-through socket
Dimensions & Weight: Standard: 140 × 140 × 27 mm; 237 g per fan; Reverse: 140 × 140 × 30 mm; 253 g per fan
Additional Information
Design & Airflow Features: Standard models combine revised blades, minimal tip clearance, and automated two-plane balancing for efficient airflow through radiators, perforated panels, and mesh filters. Reverse models use a trumpet-shaped intake and teardrop-shaped spokes to reduce flow losses and turbulence while drawing air through the rear of the fan.
Cable Management & Installation: Each fan has a 400 mm cable with an 80 mm daisy-chain section for linked fan installations. Four mounting screws are included with each fan.
Special Features: An integrated microcontroller reduces motor noise, compensates for load fluctuations, and provides inrush-current and reverse-polarity protection. Reverse models retain the illuminated open face inside the case while operating as intake fans.
WARRANTY: 6 YEARS
Key Specifications
Colourways: Black; White
Fan Size: 140mm
Configuration: Single fan
Blade Orientation: Standard; Reverse
Lighting: ARGB illumination across the translucent fan blades and central hub ring
Fan Speed: Standard: 400–2500 RPM; Reverse: 400–2650 RPM; 0 RPM below 5% PWM
Airflow: Standard: Up to 110 CFM; Reverse: Up to 98 CFM
Static Pressure: Standard: Up to 5.2 mm H₂O; Reverse: Up to 5.1 mm H₂O
Noise Level: Not stated by manufacturer
Bearing Type: Fluid dynamic bearing
Connection & Control: 4-pin PWM plug with integrated PST pass-through socket; 3-pin 5V ARGB plug with integrated ARGB pass-through socket
Dimensions & Weight: Standard: 140 × 140 × 27 mm; 237 g per fan; Reverse: 140 × 140 × 30 mm; 253 g per fan
Additional Information
Design & Airflow Features: Standard models combine revised blades, minimal tip clearance, and automated two-plane balancing for efficient airflow through radiators, perforated panels, and mesh filters. Reverse models use a trumpet-shaped intake and teardrop-shaped spokes to reduce flow losses and turbulence while drawing air through the rear of the fan.
Cable Management & Installation: Each fan has a 400 mm cable with an 80 mm daisy-chain section for linked fan installations. Four mounting screws are included with each fan.
Special Features: An integrated microcontroller reduces motor noise, compensates for load fluctuations, and provides inrush-current and reverse-polarity protection. Reverse models retain the illuminated open face inside the case while operating as intake fans.
WARRANTY: 6 YEARS
